LIFEPAK 1000 Defibrillator
Availability: In stock
Brand: Colorado Safety Supply Company
LIFEPAK 1000 Defibrillator
The rugged LIFEPAK® 1000 defibrillator is an easy-to-use automated external defibrillator (AED) designed for professional responders.A large, intuitive screen displays graphics and ECG readings that are clear and easy to read. The 1000 also features cprMAX™ Technology which minimizes CPR interruptions by allowing compressions to continue during AED charging.
AED users should be trained in CPR and use of the AED. LIFEPAK AEDs require a prescription in the U.S. Please consult your physician.
DEFIBRILLATOR All specifications are at 20°C unless otherwise specified. Waveform: Biphasic truncated exponential with voltage and duration compensation for patient impedance*. Energy Sequence: User configurable, 150 joules–360 joules. Default energy output settings are 200, 300, 360 joules. 360 joules for every shock thereafter. Charge Time: With new, nonrechargeable battery pack; 200 joules in less than 7 seconds (360 joules in less than 12 seconds). 3-Wire (Lead II) Monitoring Capability: (If ECG display option purchased). Requires purchase of 3-wire (Lead II) monitoring cable and LIFE-PATCH® electrodes. Device Software: Field upgradeable. Infant/Child Reduced Energy Defibrillation Electrodes: Reduces selected energy by a factor of 4. Intended for use only with children up to 8 years of age or 25 kg (55 lbs). Safety Classification: Internally powered equipment IEC 60601-1. Electrical Protection: Input protected against high voltage defibrillator pulses per IEC 60601-1. *Voltage compensation is limited to the voltage that would result in delivery of 360 joules into 50 ohms. DEVICE SETTINGS Modes: • AED – Provides operating capability for basic users. • Manual – Provides operating capability for advanced users. • ECG – Provides ECG display capability with 3-wire ECG cable. • Setup – Allows user to configure the device. • Data Transfer – Allows user to transfer patient data. • Auto Test – Provides daily automatic tests of hardware and software. Controls: On/Off, Shock, Menu, Two (2) configurable soft keys. User Defined Options: • Device ID – Assigns unique identifier to particular device. • Energy Sequence – User configurable from 150 to 360 joules. • Flexible Energy – Increases only after a lower energy was unsuccessful. • Auto Analyze – User can configure device to auto analyze, auto analyze after first shock, or prompt user to push analyze key before each analysis period. • CPR Time – (Post shock or after no shock advised) – User configurable – 15, 30, 45, 60, 90, 120, 180 seconds. • Device Date/Time • Voice Prompt Volume – Allows user to change speaker volume. • ECG Display – (If option purchased) – Turns display on/off for AED mode. • Motion Detection – User defined On/Off (default On). • Service Alert – Audio alarm if the device needs servicing. Configurable on/off. • Manual Access – (If ECG display option purchased) – Devices configured with an ECG display may be set up to allow user to initiate a charge and shock without analysis. • cprMAX Technology Settings: • Initial CPR – User defined time for CPR after first analysis regardless of analysis decision. Can be set to OFF, 15, 30, 45, 60, 90, 120 and 180 seconds. • Pre-shock CPR – Allows for CPR while device is charging. Can be set to OFF, 15, or 30 seconds. • Stacked Shocks – (ON/OFF) When Off, allows for provision of CPR after each shock. • Pulse Check – (Always, After Every NSA, After Second NSA, Never) Allows device to prompt for a pulse check either after each shock, after every NSA pulse check, or never prompt for a pulse check (default Never). DISPLAY Backlit LCD displays number of shocks delivered, elapsed time, text and graphics of heart rhythm and optional ECG. Size: 120mm (4.7 in) x 89 mm (3.5 in). Frequency Response: 0.55 Hz to 21 Hz (-3 dB), nominal ECG Option: • Waveform Sweep Speed – 25 mm/sec for ECG, nominal. • Waveform Viewing Time –Minimum 4 seconds. • Waveform Amplitude – 1 cm/mV, nominal. • Heart Rate – 20 to 300 BPM digital display, Display “---” if heart rate is less than 20 bpm. Heart symbol flashes for each QRS detection. ECG information is received from the adult and Infant/Child electrodes in anteriorlateral or anterior-posterior positions. A 3-wire cable can be used for ECG monitoring (Lead II). ENVIRONMENTAL One Hour Operating Temperature (from room temperature to temperature extreme, one hour duration): -20 to 60°C (-4 to +140°F). Operating Temperature: 0° to 50°C (32° to 122°F). Storage Temperature: -30° to 60°C (-22° to 144°F) with battery and electrodes (maximum exposure limited to 7 days). Atmospheric Pressure: 575 hPa to 1060 hPa (4572 to -382 meters; 15,000 to -1253 feet). Relative Humidity: 5 to 95% (non-condensing). Dust/Water Resistance: IP55 with battery and REDI-PAK™ electrodes installed (IEC 60529/EN 60529). Bump: 15 g, 1000 bumps (IEC 600-68-2-29). Shock: 40 g peak, 15-23 ms, 45 Hz cross over frequency. Drop: 1 meter drop on each corner, edge and surface (MIL-STD-810F, 516.5, Procedure IV). Vibration: Random vibration test – MIL-STD-810F, Method 514.5, Category 20; Ground vehicle 3.15 g rms 1 hour per axis. EMI: • Radiated – IEC 60601-2-4, IEC60601-1-2, CISPR 11 Class B Group 1. • Immunity – IEC 60601-2-4, IEC 60601-1-2; IEC 61000-4-2 (Level 4), IEC 61000-4-3, IEC 61000-4-6, IEC 61000-4-8. EVENT DOCUMENTATION AND COMMUNICATION Memory Capacity: Dual patient storage. Minimum 40 minutes ECG for current patient. Summarized data for previous patient. Report Types: Continuous ECG, summary (critical resuscitation events and associated waveforms), event log report (report of time stamped entries reflecting operator and device activity), test log report (self test activity report). Capacity: Minimum 100 time stamped event log entries. Data Review: CODE-STAT™ 6.1 Medical Informatics System, DT Express™ 2.1 Information Management System or higher. Communications: Infrared wireless transfer to personal computer. BATTERY AND READINESS DISPLAY Note: See operating instructions for information on battery care. Nonrechargeable Battery: • Type – Lithium Manganese Dioxide (Li/MnO2), 12.0 V, 4.5 Ah • Capacity – Typically will provide 440 200-joule discharges or 1030 minutes of operating time with a new battery (370 200-joule shocks or 900 minutes of operating time at 0°C (32°F)). • Weight – 0.45 kg (1.0 lb) • Shelf Life – (prior to installation) After the battery is stored for 5 years at 20° to 30°C, the device will provide 48 months of standby life. • Standby Life – A new battery provides device power for 5 years. • Low Battery Indicator – At least 30 200-joule shocks or 75 minutes of operating time remain when low battery is first indicated. Rechargeable Battery: • Type – Lithium-ion, 11.1 V, 4.8 Ah, 53 Wh • Capacity – Typically will provide 261 200-joule discharges or 608 minutes of operating time with a new fully-charged battery (247 200-joule shocks or 576 minutes of operating time at 0°C (32°F)). • Battery Charging Time – Within 4.5 hours • Weight – 0.45 kg (1.0 lb), maximum • Standby Life – A new fully-charged battery provides device power for 6 months. • Low Battery Indicator – At least 30 200-joule shocks or 75 minutes of operating time remain when low battery is first indicated. Battery Charger: • Supported Battery – Lithium-ion Rechargeable Battery, 11.1 V, 4.8 Ah, 53 Wh • Electrical – External Power Supply: 100-240VAC, 50/60Hz • Temperature – Operating: 0°C to 40°C; Storage: -30°C to 70°C • Charge Time – Within 4.5 hours • Charge – Constant Current/Constant Voltage within temperature limits • Length – 270 mm • Width – 97 mm • Height – 92 mm • Weight – 0.5 kg PHYSICAL CHARACTERISTICS Height: 8.7 cm (3.4 in). Width: 23.4 cm (9.2 in). Depth: 27.7 cm (10.9 in). Weight: 3.2 kg (7.1 lbs) with one set of REDI-PAK electrodes and one nonrechargeable battery. 9 | LIFEPAK 1000 S